How to Reset Canon IP2770/IP2700 Printer (Easy & Updated Guide)
How to Reset Canon IP2770/IP2700 Printer (Easy & Updated Guide)
The Canon PIXMA IP2770/IP2700 is one of the most popular inkjet printers thanks to its affordable price, reliable performance, and excellent print quality. However, after extended use, the printer may display a blinking orange light or an Error 5B00, preventing it from printing.
This issue usually occurs because the waste ink absorber counter has reached its maximum limit. Fortunately, you can fix this problem by resetting the printer using Canon Service Tool V3400.
Table of Contents
- Why Does Canon IP2770 Need a Reset?
- How to Enter Service Mode
- How to Reset Canon IP2770
- Common Error Codes
- FAQ
Why Does Canon IP2770 Need a Reset?
Every time the printer performs head cleaning, unused ink is stored in the waste ink absorber. Canon tracks this using an internal counter. Once the counter reaches its limit, the printer automatically stops printing and displays an error message.
Common symptoms include:
- Blinking orange and green lights
- Error 5B00
- "Ink Absorber Full" message
- Printer won't print
How to Enter Service Mode
- Turn off the printer but keep the power cable connected.
- Press and hold the Resume button.
- While holding Resume, press and hold the Power button.
- Release the Resume button while still holding Power.
- Press the Resume button five times.
- Release the Power button.
- Wait until the green light stays on.
Your printer is now in Service Mode.
Next Download How to Reset an Epson L3251 Printer (Complete Guide)
How to Reset Canon IP2770 Using Service Tool V3400
- Open Canon Service Tool V3400.
- Load two sheets of paper into the printer.
- Under Clear Ink Counter, select Main and click Set.
- Click EEPROM to print the printer information page.
- Turn off the printer.
- Turn it back on normally.
If the reset is successful, the printer will return to normal and the blinking light will disappear.
Common Canon IP2770 Error Codes
| Error | Cause | Solution |
|---|---|---|
| 5B00 | Waste ink counter is full | Reset using Service Tool |
| 5100 | Mechanical or encoder strip issue | Clean the encoder strip |
| 5200 | Cartridge temperature or low ink | Refill or replace the cartridge |
| 7 Blinks | Waste ink counter or cartridge issue | Reset the printer and check the cartridge |
| 13/16 Blinks | Ink level warning | Hold the Resume button for 10 seconds |
Frequently Asked Questions
Is resetting the Canon IP2770 safe?
Yes. Resetting only clears the waste ink counter and does not damage the printer.
Do I need to replace the ink absorber?
It is recommended if the printer has been heavily used for several years.
Can resetting fix all printer errors?
No. Resetting only fixes waste ink counter errors such as Error 5B00.
Conclusion
Download the resetter Canon IP2770/IP2700 is an effective solution for fixing Error 5B00, blinking lights, and waste ink counter issues. By entering Service Mode and using Canon Service Tool V3400, you can restore your printer in just a few minutes.
To extend your printer's lifespan, use high-quality ink, print regularly, and clean the printer periodically to prevent future errors.
0 Response to "How to Reset Canon IP2770/IP2700 Printer (Easy & Updated Guide)"
Post a Comment
Note: Only a member of this blog may post a comment.